Agilent Technologies auroraSonata User Manual

aurora
Sonata
Hand Held ISDN Tester—User Guide
4-14 427869
To view the results for a component test
Tip
After a test has finished you can view the results by pressing
the Results function key.
-1- From the main Simulate menu, select Review
Results to display a list of component tests.
-2- Select a test. The screen below shows typical
results for the Outgoing Channel component.
If you aborted the test part way through, the results screen
displays Aborted for each value from that point onwards.
To clear the results of a test
-1- In the Review Results menu, highlight the test
and press the Clear function key.
2 Note
For BERT, this deletes all stored sets of results.
To print a set of results
-1- In the Review Results menu, highlight the test
and press the Print function key.

Agilent Technologies auroraSonata Specifications

General

Brand	Agilent Technologies
Model	auroraSonata
Category	Test Equipment
Language	English