aurora
Sonata
Hand Held ISDN Tester—User Guide
3-46 427869
Tips:
You cannot select Bx (any B channel) when aurora
Sonata
is set
up to test a fixed link (i.e. when L2 Protocol is No D Chan).
-2-
Highlight the channel you require and press
ENTER to display the Outgoing ISDN Call
menu for that channel.
Tips:
• To move quickly through the channels, press and hold
the
key.
• To move to the first or last channel on the screen (this is
particularly useful for PRI operation), press
+
(first channel) or + (last channel).
Making an outgoing call—summary
The steps involved in making an outgoing call are set out
below. For a detailed description of each step, see Making an
outgoing call—details later in this section.
Note
When you change channels as described in Selecting a channel
for testing, aurora
Sonata
automatically displays the Simulate
menu.
-1-
From the main Simulate menu, select
Outgoing ISDN Call.
-2-
Choose a service for the call—e.g. Speech.
-3-
If you wish to set up dialling information for
specific tests, press the Opt function key to
access the Dial Options menu (see section 1).
-4-
Choose the dialling mode—En Bloc or
Overlap.
-5-
Enter the number to be called (CPN), including
a sub-address if you are using one.
To Next Page
Loading...
Need help?
General
