aurora
Sonata
Hand Held ISDN Tester—User Guide
3-38 427869
Selecting the default settings
You can return the settings on aurora
Sonata
to the way they were
before you changed them, by using the default settings.
Note
You cannot use this method to reset just one or two values—it
returns all the settings to their default values.
To display the options for changing or selecting defaults:
-1-
From the main Setup menu, select General.
This displays the General Setup menu:
-2-
Select Set Defaults to display a sub-menu for
setting and selecting default values:
Get Defaults Return aurora
Sonata
to your custom settings.
Save Defaults Save the current settings as custom defaults.
Factory Defaults Return aurora
Sonata
’s settings to the way they
were when your organisation first received the
unit from Agilent Technologies.
Returning to the factory defaults
When you return to the factory defaults, you reset all the
settings back to their original values—that is, the way they
were when you first received the tester.
To Next Page
Loading...
Need help?
General
