Issue 2 - 07/00 6-19
Advanced Features & System Maintenance - Section 3
îîNote
Downloading does not begin until aurora
Sonata
is connected to
the external power. Make sure that a battery is fitted, in case
the external power is removed during download.
When downloading is complete, aurora
Sonata
displays its
Welcome screen, with the new software version number.
-5-
Exit Trendsend.
îîNote
When you switch on aurora
Sonata
, if there is no software in the
unit or an upload has been corrupted, the unit goes into
upload mode so that you can transfer new software.
Copying system settings between units
You can load all settings defined using the Setup menus from
an aurora
Sonata
to a PC, and then from the PC to other units.
This allows you to upgrade the software in several units
without having to reconfigure them all manually afterwards.
You can upgrade one unit, configure it, then copy the settings
via a PC to the other units when you have upgraded them.
îîNote
The units to which you are copying settings must have the
same software version number as the original unit.
Uploading the settings to the PC
-1-
Set up an aurora
Sonata
in the way you require,
connect it to a PC, and switch it on.
Tip
To display the current setup of an aurora
Sonata
, press +5.
-2-
Start the Trendsend file transfer application on
the PC.
To Next Page
Loading...
Need help?
General
