aurora
Sonata
Hand Held ISDN TesterâUser Guide
6-18 427869
Copying the software onto the PC
First, you need to copy the new software onto the PC.
-1-
Insert the floppy disk containing the new
software into the PCâs floppy disk drive.
-2-
Copy the Sntamain.bin file into the
trendsend\transfer directory on the PC.
Preparing the PC to download
-1-
Connect aurora
Sonata
to the PC, but do not
switch aurora
Sonata
on.
-2-
Connect the external power supply.
-3-
Start up the Trendsend application on the PC.
Performing the download
-1-
Go to the Send menu and choose Sonata to
display a Sonata Download dialogue box.
-2-
Select the type of upgrade you are performing
by clicking the appropriate checkboxes to add
or remove a tick from each one. Choose OK.
îîNote
Normally, you will only select Main Code and Languages.
You may occasionally need to select the other checkboxes to
perform FPGA and Boot code upgrades.
-3-
To initiate the download, switch on aurora
Sonata
by pressing and simultaneously. The
PC displays a progress bar.
To Next Page
Loading...
Need help?
General
