Issue 2 - 07/00 5-13
Monitoring the Line
-3-
Change the settings as required. Details of the
monitor start time and Idle Code settings are
provided earlier in this chapter—for
instructions on the other settings, see the
appropriate section of Chapter 3.
-4-
When you have finished changing the settings,
press ESC to return to the channel display.
Reviewing a stored monitor session
You can view the simple decode of a session which is stored in
aurora
Sonata
’s memory. To display a list of stored sessions:
-1-
In the Monitor display screen, press the
Review function key. aurora
Sonata
displays a list
of stored monitor sessions.
-2-
Highlight a session and press ENTER to show
the simple protocol decode. See Chapter 7
section 1 for details of this display.
Note
You can print the stored information and delete sessions from
memory—see Chapter 7 section 2.
-3-
When you have finished viewing, press ESC to
return to the list of stored sessions.
To Next Page
Loading...
Need help?
General
