Issue 2 - 07/00 4-79
Testing in Simulation Mode - Section 5
-2-
When aurora
Sonata
receives the incoming call,
either:
• check the SUB display in the Incoming
Call screen
• press
+ 6 to display the ISDN call
information screen, and check the CLI
SUB details. See Getting information
about the current or last call in Chapter 3
section 2.
Testing services from the ISDN Test Suite
Tip
For an introduction to the ISDN Test Suite and its
applications, see Introducing the ISDN Test Suite in section 1.
You can use aurora
Sonata
’s ISDN Test Suite to check:
• Calling Line ID Presentation/Restriction
• Connected Line ID Presentation/Restriction
• ISDN Sub-addressing
• Advice of Charge (AOC)
To check one of these services, you include it as a component
of the Available services one-button test.
Note
For AOC, this method does not show how many charging
units have been sent for the call. To see this information you
need to check the ISDN call information screen. See Advice
of Charge earlier in this section.
If CorNet-T is selected you cannot use the Test Suite.
To Next Page
Loading...
Need help?
General
