aurora
Sonata
Hand Held ISDN Tester—User Guide
6-16 427869
Understanding the channel activity display
The following symbols indicate the call activity on each
channel:
Speech call connected
Loop connected
No activity
Displaying call information for a channel
To display information about the current or most recent call
on a channel:
-1- Highlight the channel and press ENTER.
For details of this display, see Chapter 3 section 2.
Clearing a connection
To clear a connection between an unattended aurora
Sonata
and a
remote unit, you clear the connection on the remote unit.
aurora
Sonata
then clears the channel to which it was connected.
Going back to normal operation
To end unattended operation, press ESC. When you exit,
aurora
Sonata
clears any active calls.
To Next Page
Loading...
Need help?
General
