aurora
Sonata
Hand Held ISDN Tester—User Guide
6-4 427869
Storing a new speed-dial number
-1-
Display the speed-dial directory. Use the Next
and Prev function keys to check each number
slot until you find an empty one.
Note
If the directory is full, you can only save a new number by
replacing an existing one.
-2-
When you find an empty slot, enter details of
the new number as follows:
• Highlight CPN and type the number (up to
20 digits). Press ENTER to save the CPN.
• To include a sub-address, highlight SUB
and repeat the process (up to 19 digits).
• Highlight Name and enter a name (up to 8
characters) to identify the number. Press
the OK function key to save the name.
-3-
To call the number, press the OK function key.
Otherwise, press ESC to exit the directory.
Adding the last CPN you called to the directory
You can store the last number that you called—i.e. the CPN
currently displayed in the Outgoing ISDN Call menu.
-1-
In the Outgoing ISDN Call menu, press the
Save function key to save the number in the
next available slot. aurora
Sonata
displays the slot
with the number in it.
Note
If the directory is full, you can only save the number by erasing
an existing one.
To Next Page
Loading...
Need help?
General
