Issue 2 - 07/00 6-13
Advanced Features & System Maintenance - Section 1
Setting up a self call
You set up self calls in the same way as normal outgoing calls,
but remember the following specific information:
• If you are using a Speech call, remember that the
Codec (audio coder/decoder) is only connected to
the currently displayed B channel.
• Although you are calling the line to which your
aurora
Sonata
is connected, you are calling a different B
channel, which may have a different CPN.
Tip
If you do not know the CPN of the other B channel, try
making a call from it to another channel. The network may
send a CLI to the receiving channel.
To Next Page
Loading...
