aurora
Sonata
Hand Held ISDN Tester—User Guide
7-4 427869
Freezing the decode display
You can press the Freeze function key to pause the display at
a particular section of decode, then return to the real-time
display when you have finished examining that part of the
information.
For example, you might do this when you are waiting for a
specific event to occur. When you think you see the
information on the real-time decode you can pause the display
and make sure it really is the relevant information, without
having to stop recording and risk missing the event.
-1-
Press the Freeze function key.
You can use the arrow keys to scroll up and down through the
information as required.
-2-
When you have finished examining the
information, press the RTime function key to
return to the real-time decode.
Note
You can view the decode in more detail using the extended
decode display, for information see section 3 of this chapter.
To Next Page
Loading...
