Agilent Technologies G1377A User Manual

Repairing the Sampler 4
1100 Series WS MWS Reference Manual 107
Using the ESD Strap
1 Unwrap the first two folds of the band and wrap the exposed adhesive side
firmly around your wrist.
2 Unroll the rest of the band and peel the liner from the copper foil at the
opposite end.
3 Attach the copper foil to a convenient and exposed electrical ground.
CAUTION
Electronic boards are sensitive to electrostatic discharge (ESD). In order to prevent
damage, always use an ESD strap supplied in the accessory kit.
Figure 17 Using the ESD Strap

Agilent Technologies G1377A Specifications

General

Brand	Agilent Technologies
Model	G1377A
Category	Laboratory Equipment
Language	English