60 1100 Series WS MWS Reference Manual
3 Troubleshooting and Test Functions
Error Messages
Error messages are displayed in the user interface when an electronic,
mechanical, or hydraulic (flow path) failure occurs which requires attention
before the analysis can be continued (for example, repair, exchange of
consumables is necessary). In the event of such a failure, the red status
indicator at the front of the module is switched on, and an entry is written
into the instrument log book.
This section explains the sampler error messages, and provides information
on probable causes and suggested actions to recover from error conditions.
To Next Page
Loading...
Need help?
General
