1100 Series WS MWS Reference Manual 7
Initialization Failed 81
Metering Home Failed 82
Motor Temperature 83
Invalid Vial Position 84
Peristaltic Pump Error 85
Vessel or Wash Vessel Error 86
Vessel Stuck to Needle 87
Maintenance Functions 88
Sample Transport Self Alignment 89
Step Commands 90
Troubleshooting 91
Troubleshooting Guide for the Well Plate Sampler G1367A 93
Turn ON and initialization steps 94
Errors which may occur during the turn ON and initialization
process 95
Instrument logbook errors and step by step repair process 99
1. Fan error (Main fan or Exhaust fan) 99
2. Initialization error 99
3. Metering sensor error 99
4. Rheodyne valve error 100
5. Needle lock error 100
6. Needle into seat error 101
7. Needle / Seat error 102
8. Sample location error 103
Needle centering over the vial or the well 104
4Repairing the Sampler
Introduction into Repairing the Sampler 106
Using the ESD Strap 107
Overview of Main Repair Procedures 108
To Next Page
Loading...
Need help?
General
