Agilent Technologies Infinity Binary Pump VL 1290 - Page 230

230 Agilent 1290 Infinity Binary Pump User Manual
13 LAN Configuration
Initialization mode selection
Using Stored
When initialization mode Using Stored is selected, the parameters are taken
from the non-volatile memory of the module. The TCP/IP connection will be
established using these parameters. The parameters were configured
previously by one of the described methods.
Figure 39 Using Stored (Principle)
Cdc"KdaVi^aZ
G6B
HidgZY
EVgVbZiZg
6Xi^kZ
EVgVbZiZg