Agilent Technologies Infinity Binary Pump VL 1290 User Manual

34 Agilent 1290 Infinity Binary Pump User Manual
3 Installing the Module
Installing the Pump
5 Turn on the power by pushing the button at the lower left hand side of the
module.
The power button stays pressed in and the status LED should be green.
NOTE
When the line power button stands out and the green light is off, the module is turned off.
NOTE
The module was shipped with default configuration settings. For changing these settings,
refer to section Setting the 8-bit configuration switch.

Agilent Technologies Infinity Binary Pump VL 1290 Specifications

General

Brand	Agilent Technologies
Model	Infinity Binary Pump VL 1290
Category	Laboratory Equipment
Language	English