36 Agilent 1290 Infinity Binary Pump User Manual
3 Installing the Module
Flow connections to the pump
1 Remove the front cover by pressing the snap fasteners on both sides.
Figure 8 Removing the Front Cover
Parts required # p/n Description
1Other modules
1 G4220-68705 Accessory kit
1 G5067-1531 Solvent Cabinet Kit
Preparations Pump is installed in the LC system.
Toxic, flammable and hazardous solvents, samples and reagents
The handling of solvents, samples and reagents can hold health and safety risks.
➔ When working with these substances observe appropriate safety procedures (for
example by wearing goggles, safety gloves and protective clothing) as described in
the material handling and safety data sheet supplied by the vendor, and follow good
laboratory practice.
➔ The volume of substances should be reduced to the minimum required for the
analysis.
➔ Do not operate the instrument in an explosive atmosphere.
To Next Page
Loading...
