DECLARATION OF CONFORMITY
According to EN ISO/IEC 17050-1:2004
Manufacturer’s Name:
Agilent Technologies, Incorporated
Manufacturer’s Address:
900 South Taft Ave
Loveland, CO 80537
USA
Declares under sole responsibility that the product as originally delivered
Product Name:
6 ½ Digit Multimeter
Model Number:
34410A, 34411A, L4411A
Product Options:
This declaration covers all options of the above product(s)
complies with the essential requirements of the following applicable European Directives, and
carries the CE marking accordingly:
Low Voltage Directive (73/23/EEC, amended by 93/68/EEC)
EMC Directive (89/336/EEC, amended by 93/68/EEC)
and conforms with the following product standards:
EMC
Standard Limit
IEC 61326:2002 / EN 61326:1997+A1:1998 +A2:2000+A3:2003
Reference Standards
CISPR 11:1990 / EN 55011:1990 Class A Group 1
IEC 61000-4-2:1995 / EN 61000-4-2:1995 4 kV/4 kV contact/air
IEC 61000-4-3:1995 / EN 61000-4-3/1995 3 V/m, 80-1000 MHz
IEC 61000-4-4:1995 / EN 61000-4-4:1995 0.5 kV signal lines, 1 kV power lines
IEC 61000-4-5:1995 / EN 61000-4-5:1995 0.5 kV line-line, 1 kV line-ground
IEC 61000-4-6:1996 / EN 61000-4-6:1996 3 V, 0.15-80 MHz
IEC 61000-4-11:1994 / EN 61000-4-11:1994 1 cycle, >95%
Canada: ICES-001:2004
Australia/New Zealand: AS/NZS CISPR 11:2002
The product was tested in a typical configuration with Agilent Technologies test systems.
Safety
IEC 61010-1:2001 / EN 61010-1:2001
Canada: CAN/CSA-C22.2 No. 61010-1-04,
168520
USA: ANSI/UL 61010-1:2005
Supplementary Information:
This DoC applies to above-listed products placed on the EU market after:
17 January 2007
Date
David L. Kepler
Quality Manager
For further information, please contact your local Agilent Technologies sales office, agent or distributor,
or Agilent Technologies Deutschland GmbH, Herrenberger Straße 130, D 71034 Böblingen, Germany.
To Next Page
Loading...
