104 Chapter 3
Mode
Occupied Bandwidth Measurement
Mode
Marker ->
Accesses the marker function menu keys that change value of center frequency or
reference level to the current value of the selected marker.
Mkr -> CF
Sets the center frequency equal to the specified marker frequency, which moves the
marker to the center of the screen. In delta marker mode, the center frequency is set to the
marker delta value. This feature is not available in zero span.
Mkr -> RL
Sets the reference level to the amplitude of the specified marker. In delta marker mode,
the reference level is set to the amplitude difference between the markers. (For example, if
the difference is –15 dB, the reference level will bet set to –15 dBm.)
Remote Command Notes CALC:OBW:MARK:AOFF
Key Path
Marker, Marker All Off
Mode SA
Key Path Front-panel key
Mode SA
Remote Command :CALCulate:OBWidth:MARKer[1]|2|3|4[:SET]:CENTer
Example CALC:OBW:MARK2:SET:CENT
Key Path
Marker ->, Mkr -> CF
Mode SA
Remote Command :CALCulate:OBWidth:MARKer[1]|2|3|4[:SET]:RLEVel
Example CALC:OBW:MARK2:SET:RLEV
Key Path
Marker ->, Mkr -> RL
To Next Page
Loading...
