Agilent Technologies N1996A-503 - Calculate:lmask[1]|2:Segment:center:level; Calculate:lmask[1]|2:Segment:center:level <Ampl; Calculate:lmask[1]|2:Segment:center:span; Calculate:lmask[1]|2:Segment:center:span <Frequency

Chapter 3 63
Mode
Meas Off (Spectrum Analyzer) Measurement
Mode
Level: Center
Sets the power level for the center segment of the current selected limit mask. This key is available
only when Center has been selected with the Segments key.
Span: Center
Sets the frequency span for the center segment of the currently selected limit mask. This key is only
available when Center has been selected with the Segment key.
Dependencies /
Couplings
If Off no limit mask will be displayed even if the 1
st
or 2
nd
segments are turned On.
If On the center segment is drawn on the display centered
around the current center frequency.
Preset OFF
State Saved Saved in instrument state.
Range On | Off
Key Path
Meas Setup, Limit Masks, Limit Mask 1, Center Segment
Mode SA
Remote Command :CALCulate:LMASk[1]|2:SEGMent:CENTer:LEVel <ampl>
:CALCulate:LMASk[1]|2:SEGMent:CENTer:LEVel?
Example :CALC:LMAS2:SEGM:CENT:LEV –20.0 dBm
Notes Key is only displayed when the selected segment is Center.
Dependencies /
Couplings
Value is displayed on the key in the currently selected Y Axis
Unit.
Preset –10.0 dBm
State Saved Saved in instrument state.
Key Path
Meas Setup, Limit Masks, Limit Mask 1, Center Level
Default Unit dBm
Mode SA
Remote Command :CALCulate:LMASk[1]|2:SEGMent:CENTer:SPAN
<frequency>
:CALCulate:LMASk[1]|2:SEGMent:CENTer:SPAN?