23
Meas
2 Meas
This key displays a menu that lets you to make one-button measurements such as adjacent
channel power and occupied bandwidth measurements. In the Spectrum Analysis mode
(see the Mode key), the default status is measurement off. This default allows you to make
your measurements specifying your unique setup requirements. In addition, you may use
the
Meas key to select one-button measurements such as, Occupied BW (Occupied
Bandwidth).
If other modes are available and have been selected, the measurements for that particular
mode will be displayed. Parameter settings can be made for these measurements using the
functions under the
Meas Setup key. Some of these settings will be common to other
measurements in the same mode. For example, you may select one of several radio
standards available by pressing
Meas Setup, Format/BW, Chan Std.
For information on the function of this key in specific modes, refer to that mode.
Mode: All
To Next Page
Loading...
