Chapter 4 285
Utility and Control/Sweep Functions
Utility Functions
Utility and Control/Sweep Functions
show on this list.
Installable Options Displays a table that lists the options, available at the time of the
installed firmware release, that you can install or have Agilent install on your analyzer.
The list will include: the available measurement options that you have licensed, the
options that are installed but not licensed, and all other available options.
Install an Option Displays a menu that enables you to install a user-installable option. You
may install an option from a list of available options, from a file you have saved on a USB
memory device, or by option type.
From List Displays a table of available options for installation. Using the up and down
navigation keys you can highlight and then select the option you want to install.
Mode All
Remote Command :SYSTem:OPTions?
Example SYST:OPT? returns a comma-separated list with quotes, of the
options that are installed. For example: “503,P03,271”
Key Path
System, Options Manager, Installed Options
Mode All
Remote Command *OPT?
Mode All
Key Path
System, Options Manager, Installable Options
Mode All
Key Path
System, Options Manager, Install an Option
Mode All
To Next Page
Loading...
