Agilent Technologies N1996A-503 - Calculate:obwidth:lmask[1]|2:Segment:center:span; Calculate:obwidth:lmask[1]|2:Segment:center:span <Frequency; Calculate:obwidth:lmask[1]|2:Segment:first; Calculate:obwidth:lmask[1]|2:Segment:first ON|OFF|1|0

112 Chapter 3
Mode
Occupied Bandwidth Measurement
Mode
Span: Center
Sets the frequency span for the center segment of the currently selected limit mask. This key is only
available when Center has been selected with the Segment key.
1st Segment
Sets the state of the first segment to On or Off. This key is available only when
1st has been selected
with the
Segments key.
Mode SA
Remote Command :CALCulate:OBWidth:LMASk[1]|2:SEGMent:CENTer:SPAN
<frequency>
:CALCulate:OBWidth:LMASk[1]|2:SEGMent:CENTer:SPAN?
Example :CALC:OBW:LMAS1:SEGM:CENT:SPAN 1.75 MHz
Notes Key is only displayed when the selected segment is Center.
Preset Not affected by a preset but set per default to 2 MHz after a
power cycling
State Saved Saved in instrument state.
Min 0 Hz
Max 6 GHz
Key Path
Meas Setup, Limit Masks, Limit Mask 1, Center Segment Span
Default Unit Hz
Mode SA
Remote Command :CALCulate:OBWidth:LMASk[1]|2:SEGMent:FIRSt
ON|OFF|1|0
:CALCulate:OBWidth:LMASk[1]|2:SEGMent:FIRSt?
Example :CALC:OBW:LMAS1:SEGM:FIRS ON
Notes
Key is only displayed when the selected segment is 1
st
.