20 Chapter 1
Using This Document
About the User’s and Programmer’s Information
Using This Document
About the User’s and Programmer’s Information
This document provides user and programmer information for the spectrum analyzer
functions.
NOTE The front- and rear-panel features, along with the numeric keypad and
alpha-numeric softkey fundamentals, are illustrated and described in
the “Getting Started” chapter of the measurement guide.
What is in This Book
• Instrument Functions - provides information about the front-panel and lower-level
key functions of your analyzer and their associated programming commands. The
information is organized in alphabetical order based on the labels of the front-panel
keys. The lower-level menu key functions are described under the front-panel keys in
the same order as they appear in the menus.
• Programming Fundamentals - provides information on SCPI and on using the LAN.
Refer to Chapter 5 , “Programming Fundamentals,” on page 293.
• Using the STATus System - provides information about the instrument’s internal
status monitoring system with information on how to monitor the status using a remote
program and descriptions of all the available commands. Refer to Chapter 6 , “Using
The Status Monitoring Subsystem,” on page 323 and Chapter 7 , “IEEE and STATus
Commands (Remote Commands Only),” on page 343.
To Next Page
Loading...
