Agilent Technologies N1996A-503 - AMPTD y Scale; Meas off (Spectrum Analyzer) Measurement; Meas off Measurement Description

30 Chapter 3
Mode
Meas Off (Spectrum Analyzer) Measurement
Mode
Meas Off (Spectrum Analyzer) Measurement
To configure measurement settings, select Meas Off and then press Meas Setup. Pressing
Control/Sweep enables you to restart a measurement. Refer to the “Control/Sweep” on
page 98.
Meas Off Measurement Description
This key accesses the core spectrum analysis measurement functionality and turns off the
current one-button measurement. With this key selected, you will have access to the
measurement setup functionality for the Spectrum Analyzer measurement.
AMPTD Y Scale
Activates the reference level function, and accesses the amplitude menu keys. The
amplitude menu keys set functions that affect the way data on the vertical axis is
displayed or corrected.
Autoscale
Executes an automatic scaling of the
Reference Level, and the Scale/Div settings. Autoscale
is a front-panel only function and has no SCPI command.
Mode Spectrum Analyzer
Remote Command :CONFigure:SANalyzer
Example CONF:SAN selects the Spectrum Analyzer measurement.
State Saved Saved in instrument state.
Remote Command
Notes
You must be in the Spectrum Analysis mode to use this command.
Use INSTrument:SELect SA to set the mode.
Key Path
Meas, Meas Off
Mode: SA
Key Path Front-panel key
Mode SA