Agilent Technologies N1996A-503 - [:Sense]:Acpower:average:tcontrol; [:Sense]:Acpower:average:tcontrol Exponential|Maxhold|Repeat|Rmaxhold

Chapter 3 135
Mode
Adjacent Channel Power—ACP (I&M) Measurement
Mode
Meas
This Meas key displays a menu that lets you to make one-button measurements such as
the adjacent channel power measurement. In the Channel Analyzer mode, Adjacent
Channel Power is the default measurement. This default allows you to make immediate
measurements using the current default setup. You can change settings as required for
your unique measurement.
Settings can be changed using the functions under the Meas Setup key (see “Meas Setup”
on page 135).
Meas Setup
Accesses the settings that can be selected for the ACP measurement. The ACP
measurement must be selected to access these features. Press
Meas, ACP (I&M) to select the
measurement.
Avg Mode
Sets the type of termination control used for the averaging function. This determines the
averaging action after the specified number of measurements has been reached (see “Avg
Number” on page 137).
Default Unit Hz
Mode: All
Key Path Front-panel key
Mode: Channel Analyzer
Key Path Front-panel key
Mode Channel Analyzer
Remote Command [:SENSe]:ACPower:AVERage:TCONtrol
EXPonential|MAXHold|REPeat|RMAXhold
[:SENSe]:ACPower:AVERage:TCONtrol?
Example ACP:AVER:TCON EXP