Agilent Technologies N1996A-503 - Page 146

146 Chapter 3
Mode
Adjacent Channel Power—ACP (I&M) Measurement
Mode
Center Chan High Limit Sets the high limit for center channel power.
Center Chan Low Limit Sets the low limit for center channel power.
Adj Chan 1 High Limit Sets the high limit for adjacent channel 1 power.
Adj Chan 2 High Limit Sets the high limit for adjacent channel 2 power.
Mode Channel Analyzer
Preset −10 dBm
State Saved Saved in State
Min –100 dBm
Max +100 dBm
Mode Channel Analyzer
Preset –30 dBm
State Saved Saved in State
Min –100 dBm
Max +100 dBm
Mode Channel Analyzer
Preset –30 dB
State Saved Saved in State
Min –100 dB
Max +100 dB
Mode Channel Analyzer
Preset –50 dB
State Saved Saved in State
Min –100 dB