Chapter 3 157
Mode
Two Port Insertion Loss Measurement
Mode
Control/Sweep
Accesses the sweep and measurement control settings that can be changed when using the
Two Port Insertion Loss measurement.
Restart, Single, Cont
The control sweep functionality is shared across all the Modes. See “Control/Sweep” on
page 252 of the “Utility and Control/Sweep Functions” section for details about how they
operate.
FREQ/Channel
The following FREQ/Channel keys are for setting up a Two Port Insertion Loss
measurement. The measurement must already be running to access these keys. Press
Meas, Two Port Insertion Loss to turn on the measurement.
Start Freq
Use this key to specify the Start Frequency of your frequency range.
Preset 10.00 dB
State Saved Saved in State
Range 1.0 to 20
Key Path
AMPTD Y Scale, Scale/Div
Mode SR
Key Path Front-panel key
Mode SR
Key Path Front-panel key
Mode Stimulus / Response
Remote Command [:SENSe]:FREQuency:STARt <freq>
[:SENSe]:FREQuency:STARt?
To Next Page
Loading...
