Chapter 4 267
Utility and Control/Sweep Functions
Utility Functions
Utility and Control/Sweep Functions
can use Bitmap to enable the normal dark background format.
Reverse Bitmap Enables you to select the format for your saved screen file. The default
format for a screen file is Bit-Mapped Graphic. A Bit-Mapped Graphic file is a file
containing an exact bit representation of the screen stored in Portable Network Graphics
(PNG) format. You can use Reverse Bitmap to enable the light background format. This file
format is the same as Bit-Mapped Graphic, but the black display background is changed to
white and the yellow trace(s) is turned to green to preserve printer black ink.
Source
Enables you to select the source for the information you want to save.
• When
Type is set to Trace, Source enables you to save trace 1, 2, 3, or 4 along with state.
All saves all traces in a single .trc file, along with the state.
For any other Save type,
Source is disabled (grayed out).
Trace 1 Selects trace 1 to be saved.
Mode All
Range On | Off
Key Path
Save, Format, Bitmap
Mode All
Range On | Off
Key Path
Save, Format, Reverse Bitmap
Mode All
Preset File save source survives Preset and *RST, but is set to All Traces
at power up.
State Saved File save format is not saved in the instrument state
Key Path
Save, Source
Mode All
To Next Page
Loading...
