Chapter 4 279
Utility and Control/Sweep Functions
Utility Functions
Utility and Control/Sweep Functions
IP Config Displays the menu keys that select the method used to assign the analyzer IP address.
You can choose not to use a LAN IP address or to assign a static address with a specific number. It
can also be assigned automatically using the DHCP or Auto IP functions.
None Enables the option of not accepting a LAN connection. Even if a LAN connection is made, the network
cannot connect to the instrument. This selection disables the IP Address, Net Mask and Gateway features.
DHCP Selects the DHCP function for assigning the IP address. When you connect to a network with DHCP
selected, if the Host Name is recognized by the network, then an IP address and other network information will
automatically assigned.
Mode All
Preset local host
State Saved Survives Preset and power cycle, but not saved in Instrument
State.
Key Path
System, Controls, IP Admin, Host Name
Mode All
Preset Not affected by Preset.
State Saved Survives Preset and power cycle, but not saved in Instrument
State.
Key Path
System, Controls, IP Admin, IP Config
Mode All
Notes Selecting None disables IP Address, Net Mask, and Gateway key
functions.
Key Path
System, Controls, IP Admin, IP Config, None
Mode All
Notes Selecting DHCP disables IP Address, Net Mask, and Gateway key
functions.
Key Path
System, Controls, IP Admin, IP Config, DHCP
To Next Page
Loading...
