X U8903A User’s Guide
DECLARATION OF CONFORMITY
According to EN ISO/IEC 17050-1:2004
Agilent Technologies Microwave Products (M) Sdn. Bhd
Bayan Lepas Free Industrial Zone,
11900, Bayan Lepas, Penang, Malaysia
Declares under sole responsibility that the product as originally delivered
This declaration covers all options of the above product(s)
complies with the essential requirements of the following applicable European Directives, and carries
the CE marking accordingly:
Low Voltage Directive (2006/95/EC)
EMC Directive (2004/108/EC)
and conforms with the following product standards:
IEC61326-1:2005 / EN61326-1:2006
CISPR 11:2003 / EN 55011:2007
IEC 61000-4-2:2001 / EN 61000-4-:1995+A1:1998+A2:2001
IEC 61000-4-3:2002 / EN 61000-4-3:2002
3 V/m (80 MHz-1.0 GHz)
3 V/m (1.4 GHz
-2.0 GHz)
1 V/m (2.0 GHz-2.7 GHz)
IEC 61000-4-4:2004 / EN 61000-4-4:2004
1 kV signal lines, 2 kV power lines
IEC 61000-4-5:2001 / EN 61000-4-5:1995:A1:2001
1 kV line-line, 2 kV line-ground
IEC 61000-4-6:2003 / EN 61000-4-6:2007
IEC 61000-4-11:2004 / EN 61000-4-11:2004
100% Dip (1 cycle)
60% Dip (10 cycles)
100% short interruptions (250 cycles)
Australia/New Zealand: AS/NZS CISPR11:2004
The product was tested in a typical configuration with Agilent Technologies test systems.
IEC 61010-1:2001 / EN 61010-1:2001
USA: ANSI/UL 61010
CAN/CSA-C22.2 No. 61010-1-04
This DoC applies to above-listed products placed on the EU market after:
For further information, please contact your local Agilent Technologies sales office, agent or distributor,
or Agilent Technologies Deutschland GmbH, Herrenberger Straße 130, 71034 Böblingen, Germany.
Template: A5971-5302-2, Rev. E00
To Next Page
Loading...
Need help?
General
