Operation and Features 2
U8903A User’s Guide 43
Save
This function saves the current U8903A state to a file. You
have the option to save the U8903A state for a single
channel or whole module. When is pressed in the
sweep, analyzer, or generator mode, you may select either
the selected channel or whole module to save the U8903A
state. When is pressed in the graph mode, you can
only select the whole module to save the U8903A state. The
File Manager will be launched once you have made your
selection.
Figure 2-14 File Manager menu for saving the U8903A state
You may save the current U8903A state to a file in either
the U8903A internal memory or a USB external flash
storage. Set the storage location for your file by pressing
Source and select either the U8903A internal memory or a
USB external flash storage before saving.
To save the file, press Save. To delete a file, press Delete. You
may change a selected file name by pressing Rename. To
export a file from the U8903A internal memory to a USB
external flash storage, press Export and select the desired
external flash storage.
To Next Page
Loading...
Need help?
General
