Agilent Technologies u8903a User Manual

Audio Generator Functions 4
U8903A User’s Guide 81
The noise signal may be configured with the following
parameters.
• Amplitude
• DC Offset
DC signal
A DC voltage is used when performing amplifier linearity
measurements. Press Waveform > DC to select the DC signal
output.
The following figure shows the DC signal menu.
Figure 4-14 DC signal menu
The only configurable parameter for the DC signal is
amplitude.

Agilent Technologies u8903a Specifications

General

Brand	Agilent Technologies
Model	u8903a
Category	Measuring Instruments
Language	English