Agilent Technologies u8903a

14 U8903A User’s Guide
1Getting Started

Preset
A preset does not erase the flash memory, state memory, or
I/O configuration. A preset will delete all customized settings
on the U8903A.
To preset the U8903A, you can perform either one of the
following steps.
• Send the *RST, SYSTem:PRESet,
SYSTem:RESet[:MODE], or SYSTem:RESet:CHANnel
SCPI commands from the PC via the USB, GPIB, or LAN
interface.
• Press on the System panel.
Opt 906 (Switzerland) 8120-2296 Opt 922 (China) 8120-8377
Opt 912 (Denmark) 8120-2957 Opt 927 (Thailand) 8120-8871
Opt 917 (South Africa) 8120-4600
Table 1-3 Power cord types (continued)
Plug type Cable part
number
Plug type Cable part
number