Appendixes
U8903A User’s Guide 143
For the following arbitrary file example, the highest
numerical number of the sample points, which is 6, is output
with the Vpeak. The other samples are level- controlled
according to their ratio to the maximum.
#Vpeak: 2
#DC offset: –3
#Points:
0
–1
–1.5
–1
0
2
4
6
4
2
.
.
.
Any of the following conditions may cause an error or
warning message to appear.
• Unable to load the sample points, as the points may not
be a valid float.
• Summation of the Vpeak and DC offset exceeds the
maximum voltage for the current output connection type.
• Invalid Vpeak and DC offset values.
• Total of sample points < 32.
• The arbitrary file does not exist.
To Next Page
Loading...
Need help?
General
