Alcatel-Lucent 7210 SAS-X - Page 340

VPLS Services Command Reference
Page 340 7210 SAS-X, R6 OS Services Guide
— interval
— no interval
— priority priority-value
— no priority
— [no] ccm-enable
— ccm-ltm-priority priority
— no ccm-ltm-priority
— description description-string
— no description
— [no] eth-test-enable
— test-pattern {all-zeros | all-ones} [crc-enable]
— no test-pattern
— low-priority-defect {allDef | macRemErrXcon |
remErrXcon | errXcon | xcon | noXcon}
— mac-address mac-address
— no mac-address
— one-way-delay-threshold seconds
— [no] shutdown
— mip [mac mac address] (MIP is supported only 7210 SAS-
R6)
— mip default-mac
— no mip
— igmp-snooping
— [no] fast-leave
— import policy-name
— no import
— last-member-query-interval interval
— no last-member-query-interval
— max-num-groups max-num-groups
— no max-num-groups
— [no] mrouter-port
— mvr
— from-vpls service-id
— no from-vpls
— to-sap sap-id
— no to-sap
— query-interval interval
— no query-interval
— query-response-interval interval
— no query-response-interval
— robust-count count
— no robust-count
— [no] send-queries
— static
— [no] group group-address
— [no] starg
— version version
— no version
— ingress
— agg-shaper-rate
— no agg-shaper-rate
— aggregate-meter-rate rate-in-kbps [ burst burst-in-kbits]
— no aggregate-meter-rate
— filter ip ip-filter-id
— filter [ ipv6 ipv6-filter-id]