Alcatel-Lucent 7450 - Page 99

Security
7450 ESS System Mangement Guide Page 99
Management Access Filter Commands
config
—system
— security
— [no] management-access-filter
— [no] ip-filter
— default-action {permit | deny}
— [no] entry entry-id
— action {permit | deny | deny-host-unreachable}
—no action
— description description-string
—no description
— dst-port value [mask]
—no dst-port
— [no] log
— protocol protocol-id
—no protocol
— router {router-instance}
—no router
— src-ip {ip-prefix/mask | ip-prefix netmask}
—no src-ip
— src-port {port-id | cpm | lag lag-id }
—no src-port
— src-port
old-entry-number new-entry-number
— [no] shutdown
— [no] mac-filter
— default-action {permit | deny}
— [no] entry entry-id
— action {permit | deny | deny-host-unreachable}
—no action
— description description-string
—no description
— [no] log
— match frame-type frame-type
—no match
— cfm-opcode {lt | gt | eq} opcode
— cfm-opcode range start end
—no cfm-opcode
— dot1p dot1p-value [dot1p-mask]
— dsap dsap-value [dsap-mask]
— dst-mac ieee-address [ieee-address-mask]
—no dst-mac
— etype 0x0600..0xfff
—no etype
— snap-oui {zero | non-zero
}
— snap-pid snap-pid
—no snap-pid
— src-mac ieee-address [ieee-address-mask]
—no src-mac
— ssap ssap-value [ssap-mask]
—no ssap
— svc-id service-id
—no svc-id