Network QoS Policies
Quality of Service Guide 137
network
Syntax network [policy-id] [detail]
Context show>qos
Description This command displays network policy information.
Special Cases Network QoS Policy Output Fields — The following table describes network QoS Policy
output fields.
Table 24: Show QoS Network Output Fields
Label Description
Policy-Id The ID that uniquely identifies the policy.
Remark True
Remarking is enabled for all packets that egress this router where the
network policy is applied. The remarking is based on the forwarding
class to DSCP and LSP EXP bit mapping defined under the egress node
of the network QoS policy.
False
Remarking is disabled.
Description A text string that helps identify the policy’s context in the configuration
file.
Forward Class/
FC Name
Specifies the forwarding class name.
Profile Out
Specifies that IP packets requiring marking the egress on this
forwarding class queue that are out of profile.
In
Specifies that IP packets requiring marking the egress on this
forwarding class queue that are in profile.
Accounting Packet-based
Specifies that the meters associated with this policy do not account for
packet framing overheads (such as Ethernet the Inter Frame Gap (IFG)
and the preamble), while accounting for the bandwidth to be used by
this flow.
Frame-based
Specifies that the meters associated with this policy account for the
packet framing overheads (such as for Ethernet the IFG and preamble),
while accounting the bandwidth to be used by the flow.
To Next Page
Loading...
