Basic Configurations
420 Quality of Service Guide
mbs 100
exit
exit
exit
----------------------------------------------
*A:Dut-T>cfg>qos>qgrps#
Configuring Egress Queue Group Template
The following displays an egress queue group template configuration example:
*A:Dut-T>cfg>qos>qgrps# info
----------------------------------------------
...
egress
queue-group "QG_egress_1" create
description "Egress queue group"
queue 1 best-effort create
mbs 100
exit
queue 2 best-effort create
mbs 100
exit
queue 3 best-effort create
mbs 100
exit
queue 4 best-effort create
mbs 100
exit
exit
exit
----------------------------------------------
*A:Dut-T>cfg>qos>qgrps#
Applying Ingress Queue Group to SAP Ingress Policy
The following display a SAP ingress policy configuration with group queue-group-name
specified:
*A:Dut-T>config>qos>sap-ingress# info
Note: To fully use the queue group feature to save queues, you must explicitly map all
forwarding classes to queue group queues. This rule is applicable to SAP ingress, SAP
egress and network QoS policies.
To Next Page
Loading...
