Child
890 Quality of Service Guide
Child
Child is a logical state of a queue or scheduler that has been configured with a valid parent
scheduler association. The child/parent association is used to build the hierarchy among the
queues and schedulers.
Level
The level parameter defines the strict priority level for a child queue or scheduler with regards
to bandwidth allocation during the above CIR distribution phase on the child’s parent
scheduler. This allocation of bandwidth is done after the ‘within CIR’ distribution is finished.
All child queues and schedulers receive the remaining bandwidth according to the strict
priority level in which they are defined with higher levels receiving bandwidth first and lower
levels receiving bandwidth if available.
MBS
The Maximum Burst Size (MBS) command specifies the relative amount of the buffer pool
space for the maximum buffers for a specific ingress network XMA or MDA forwarding class
queue or egress network port forwarding class queue. The value is entered as a percentage.
MCR
The Minimum Cell Rate (MCR).
To Next Page
Loading...
