Network QoS Policies
Quality of Service Guide 133
The no form of this command removes the DiffServ code point to forwarding class association.
Default none
Parameters dscp-name — The name of the DiffServ code point to be associated with the forwarding class.
DiffServ code point can only be specified by its name and only an existing DiffServ code
point can be specified. The software provides names for the well known code points.
Values be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3, cs4,
cs5, nc1, nc2, af11, af12, af13, af21, af22, af23, af31, af32, af33,
af41, af42, af43, cp11, cp13, cp15, cp17, cp19, cp21, cp23, cp25,
cp27, cp29, cp31, cp33, cp35, cp37, cp39, cp41, cp42, cp43, cp44,
cp45, cp47, cp49, cp50, cp51, cp52, cp53, cp54, cp55, cp57, cp58,
cp59, cp60, cp61, cp62, cp63
fc fc-name — Specify the forwarding class name. All packets with DSCP value or MPLS EXP
bits that is not defined will be placed in this forwarding class.
Default None, the fc name must be specified
Values be, l2, af, l1, h2, ef, h1, nc
Show Commands
dscp-table
Syntax dscp-table [value dscp-value]
Context show>qos
Description Displays the DSCP name to DSCP value mappings.
Parameters value dscp-value — The specific DSCP value for which to display information.
Default Show all values
Values 0 to 63
Table 23: Show QoS Network Table Output Fields
Label Description
DSCP Name Displays the name of the DiffServ code point to be associated with the
forwarding class.
DSCP Value Displays the DSCP values range between 0 and 63.
TOS (bin) Displays the type of service in Binary format.
TOS (hex) Displays the type of service in Hex format.
To Next Page
Loading...
