Network Queue QoS Policies
Quality of Service Guide 161
Network Queue QoS Policy Command Reference
Command Hierarchies
• Configuration Commands
• Operational Commands
• Show Commands
Configuration Commands
config
—qos
— network-queue policy-name
— description description-string
—no description
— egress-hsmda
— [no] wrr-policy {add add-bytes | subtract sub-bytes}
— [no] packet-byte-offset
— [no] queue queue-id
— [no] adaptation-rule [pir {min | max | closest}]
— percent-rate percentage
— wrr-weight value
— mbs {size [bytes | kilobytes] | default}
— slope-policy hsmda-slope-policy-name
— [no] fc fc-name
— multicast-queue queue-id
—no multicast-queue
— queue queue-id
—no queue
— egress-hsmda
— [no] queue
— queue queue-id [multipoint] [queue-type] pool pool-name [create]
—no queue queue-id
— adaptation-rule [pir adaptation-rule] [cir adaptation-rule]
—no adaptation-rule
— avg-frame-overhead percent
—no avg-frame-overhead
— cbs percent
—no cbs
— high-prio-only percent
—no high-prio-only
— mbs percent
—no mbs
— [no] pool pool-name [create]
To Next Page