Alcatel-Lucent 7450 - Applying Slope Policies

Slope QoS Policies
Quality of Service Guide 623
start-avg percent
max-avg percent
max-prob percent
no shutdown
low-slope
start-avg percent
max-avg percent
max-prob percent
no shutdown
exceed-slope
start-avg percent
max-avg percent
max-prob percent
no shutdown
time-average-factor taf
The following displays the slope policy configuration:
A:ALA-7>config>qos# info
#------------------------------------------
echo "QoS Slope/Queue Policies Configuration"
#------------------------------------------
...
slope-policy "slopePolicy1" create
description "Test"
high-slope
no shutdown
exit
low-slope
no shutdown
exit
exceed-slope
no shutdown
exit
exit
...
#------------------------------------------
A:ALA-7>config>qos#
Applying Slope Policies
Apply slope policies to the following entities:
• Ports
• MDA (FP1)
• FP (FP2 and higher based hardware)