Alcatel-Lucent 7450 - Copying and Overwriting Network Policies

Network QoS Policies
Quality of Service Guide 93
Copying and Overwriting Network Policies
You can copy an existing network policy to a new policy ID value or overwrite an existing
policy ID. The overwrite option must be specified or an error occurs if the destination policy
ID exists.
CLI Syntax: config>qos# copy network source-policy-id dest-policy-id
[overwrite]
The following output displays the copied policies:
A:ALA-12>config>qos# info detail
---------------------------------------------
...
network 1 create
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out
dscp be fc be profile out
dscp ef fc ef profile in
dscp cs1 fc l2 profile in
dscp nc1 fc h1 profile in
dscp nc2 fc nc profile in
dscp af11 fc af profile in
dscp af12 fc af profile out
dscp af13 fc af profile out
dscp af21 fc l1 profile in
dscp af22 fc l1 profile out
...
network 600 create
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out
dscp be fc be profile out
dscp ef fc ef profile in
dscp cs1 fc l2 profile in
dscp nc1 fc h1 profile in
dscp nc2 fc nc profile in
dscp af11 fc af profile in
dscp af12 fc af profile out
dscp af13 fc af profile out
dscp af21 fc l1 profile in
dscp af22 fc l1 profile out
...
network 700 create
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out
dscp be fc be profile out
dscp ef fc ef profile in
dscp cs1 fc l2 profile in
dscp nc1 fc h1 profile in