Alcatel-Lucent 7450 - SONET;SDH Ports; Default Network Queue Policy Values

Network Queue QoS Policies
Quality of Service Guide 153
ethernet
network
queue-policy "nq1"
exit
exit
no shutdown
----------------------------------------------
A:ALA-49>config>port#
SONET/SDH Ports
Use the following CLI syntax to apply a network queue policy to a SONET/SDH port:
CLI Syntax: config>port#
sonet-sdh
path path
network
queue-policy name
The following output displays the port configuration.
A:ALA-48>config>port# info
----------------------------------------------
description "OC-12 SONET/SDH"
sonet-sdh
path sts3
network
queue-policy "nq1"
exit
no shutdown
exit
exit
no shutdown
----------------------------------------------
A:ALA-48>config>port#
Default Network Queue Policy Values
The default network queue policies are identified as policy-id default. The default policies
cannot be modified or deleted. Table 25 displays default policy parameters.
Table 25: Network Queue Policy Defaults
Field Default
description "Default network queue QoS policy."