Alcatel-Lucent 7450 - Creating a Qos Port Scheduler Policy

Overview
542 Quality of Service Guide
The following output displays a VPRN service configuration with the scheduler policy SLA2
applied to the SAP ingress and egress.
A:SR7>config>service# info
----------------------------------------------
...
vprn 1 customer 1 create
ecmp 8
autonomous-system 10000
route-distinguisher 10001:1
auto-bind-tunnel
resolution-filter
resolution-filter ldp
vrf-target target:10001:1
interface "to-ce1" create
address 11.1.0.1/24
sap 1/1/10:1 create
ingress
scheduler-policy "SLA2"
exit
egress
scheduler-policy "SLA2"
exit
exit
exit
no shutdown
exit
epipe 6 customer 6 vpn 6 create
----------------------------------------------
A:SR7>config>service#
Creating a QoS Port Scheduler Policy
Configuring and applying QoS port scheduler policies is optional. If no QoS port scheduler
policy is explicitly applied to a SAP or IP interface, a default QoS policy is applied.
To create a port scheduler policy, define the following:
• A port scheduler policy name.
• Include a description. The description provides a brief overview of policy features.
Use the following CLI syntax to create a QoS port scheduler policy.
The create keyword is included in the command syntax upon creation of a policy.
CLI Syntax: config>qos
port-scheduler-policy scheduler-policy-name [create]
description description-string
level priority-level rate pir-rate [cir cir-rate]
max-rate rate