Service Egress and Ingress QoS Policies
Quality of Service Guide 231
— copy named-pool-policy src-name dst-name [overwrite]
Show Commands
show
—qos
— sap-ingress [policy-id] [association | match-criteria | hsmda | detail]
— sap-egress[policy-id] [association | match-criteria | hsmda | detail]
Command Descriptions
Configuration Commands
Generic Commands
description
Syntax description description-string
no description
Context config>qos>sap-egress
config>qos>sap-egress>ip-criteria>entry
config>qos>sap-ingress
config>qos>sap-ingress>ip-criteria>entry
config>qos>sap-ingress>ipv6-criteria>entry
config>qos>sap-ingress>mac-criteria>entry
Description This command creates a text description stored in the configuration file for a configuration context.
The no form of this command removes any description string from the context.
Default No description is associated with the configuration context.
Parameters description-string — A text string describing the entity. Allowed values are any string up to 80
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
To Next Page
Loading...
