Overview
650 Quality of Service Guide
exit
exit
exit
----------------------------------------------
A:SR>config>service#
VPRN Services
Use the following CLI syntax to apply QoS policies to ingress VPRN SAPs on the 7750 SR
and 7950 XRS:
CLI Syntax: config>service# vprn service-id [customer customer-id]
interface ip-int-name
sap sap-id
ingress
qos policy-id [shared-queuing |
multipoint-shared]
The following output displays a VPRN service configuration. The default SAP ingress policy
was not modified but shared queuing was enabled.
A:SR7>config>service# info
----------------------------------------------
vprn 1 customer 1 create
interface "to-ce1" create
address 11.1.0.1/24
sap 1/1/10:1 create
ingress
qos 1 multipoint-shared
exit
exit
exit
no shutdown
exit
----------------------------------------------
A:SR7>config>service#
Default Shared Queue Policy Values
The only allowed shared queue policy is the default and cannot be deleted. The only
configurable entities are the queue priority, attributes of individual queues and the description
string. Table 43 lists the default values.
To Next Page
Loading...
