Network QoS Policies
Quality of Service Guide 99
Command Descriptions
Configuration Commands
Generic Commands
description
Syntax description description-string
no description
Context config>qos>network policy-id
Description This command creates a text description stored in the configuration file for a configuration context.
The description command associates a text string with a configuration context to help identify the
context in the configuration file.
The no form of this command removes any description string from the context.
Default No description is associated with the configuration context.
Parameters description-string — A text string describing the entity. Allowed values are any string up to 80
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
Operational Commands
copy
Syntax copy network src-pol dst-pol [overwrite]
Context config>qos
Description This command copies existing QoS policy entries for a QoS policy-id to another QoS policy-id.
The copy command is used to create new policies using existing policies and also allows bulk
modifications to an existing policy with the use of the overwrite keyword.
To Next Page
Loading...
