Service Egress and Ingress QoS Policies
Quality of Service Guide 217
*A:Dut-T>config>qos>sap-ingress# info
----------------------------------------------
queue 1 create
exit
queue 2 create
exit
queue 3 create
exit
queue 11 multipoint create
exit
fc "af" create
queue 2
exit
fc "be" create
queue 1
exit
fc "ef" create
queue 3
exit
lsp-exp 0 fc "be" priority low
lsp-exp 1 fc "af" priority high
lsp-exp 2 fc "ef" priority low hsmda-counter-override 1
lsp-exp 3 fc "ef" priority high hsmda-counter-override 2
Service Management Tasks
This section discusses the following service management tasks:
• Deleting QoS Policies
• Copying and Overwriting QoS Policies
• Remove a Policy from the QoS Configuration
• Editing QoS Policies
Applying Service Ingress and Egress Policies
Apply SAP ingress and egress policies to the following service SAPs:
• Epipe
• IES
• VPLS
• VPRN
Refer to the Subscriber Services Overview section of the Services Guide for information
about configuring service parameters on the 7750 SR and 7450 ESS.
To Next Page
Loading...
